Air Cooled Scroll Chillers

I CON and I MED Scroll Chillers

The I CON chiller series utilizes the R 407C refrigerant with a brazed plate heat exchanger as an evaporator and is best suited for applications that make use of clean, treated water as a cooling media. It can operate comfortably in ambient temperatures of up to 45°C. I MED chillers are similar in their functioning, but differ in their use of R 134a refrigerant and can sustain ambient temperatures of even 55°C. These types of chillers can be used in various applications like MRI, data centers, induction heating, X-ray spectrometry, laser marking and welding, water jet cutting, environmental test chambers, power electronics and printing. Due to its wide range of uses, these chillers are manufactured to be compatible with indoor and outdoor settings, making them more versatile and available for varied utilisation.

I CON and I MED Scroll Chillers Specifications

Specifications

• Cooling capacity range : 1.75 kW to 1050 kW
• Fluid : Soft Water / water + glycol solution
• Refrigerant : R407c / R134a
• Operating ambient temperature range : +10 to + 50C
• Best fluid outlet temperature : 15degc, At ambient : 35degc & ∆T : 5 Deg C
• Condenser Type : Air-Cooled, Fin & Tube
• Evaporator Type : Brazed Plate Heat Exchanger
• Operating environment : Indoor / Out door - Shelter from rain, dust, insects, humidity, sunlight
• Power supply : 1 PH / 3 PH, 220V / 415 V, AC, 50/60 HZ
• MOC of wetted parts : SS 202 / 304 / 316 / CU
• Fluid loop : Open loop with media tank in the circuit
• Noise level : < 85 db
• Life expectancy : 10-15 years

Design Inputs from Customer

Required cooling capacity in kW

Required / rated flow rate of cooling liquid

Max liquid leaving temperature from cooling unit, at max ambient temp.

Increase in liquid temperature at outlet of inverter

Operating ambient temperature range (+/-)

Installation site environmental conditions

Power supply - voltage, frequency, phase.

Electrical control logic

Type of configuration for the cooling system

Acceptance test, applicable standards and certifications